1" and 2" Body Lift fits 2nd Gen Xterra
1" and 2" Body Lift fits 2nd Gen Xterra
1 inch Kit will include:
1 inch body blocks
Body Mount Hardware
2 inch kit will include:
2 inch body blocks
Body Mount Hardware
Extended radiator hose
This is a 1 or 2 inch body lift kit for the Second Generation Nissan Xterra, years ranging from 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, and 2015. Once installed correctly, it will not effect any suspension components. It will provide a more aggressive look and allow you fit larger tires without the negative side effects you would have had originally.
Instructions can be recommended.
The rear bumper will need to be removed and new holes drilled into the OEM bumper bracket to be able to raise it into the new location. this goes for both 1” and 2” body lifts.
The front bumper will not need bumper brackets as it will lift with the body when you are in the process of installing. The crash bar will stay in place and not be effected when installing the lift, and everything else around it will fit into the new location one lifted,
No other brackets are included with the sale.
Any questions, please don't hesitate to message me
Ultra High Molecular Weight-Polyethylene
UHMW has been tested to have minimal 1% total deformation when put under 750 PSI of compression. When using multiple points to hold a vehicle, the weight of the vehicle is spread out so dramatically across the surface area of the Body Block that the PSI compression will be only a small percentage of the 750 PSI.
UHMW-PE is odorless, tasteless, and nontoxic. It embodies all the characteristics of high-density polyethylene (HDPE) with the added traits of being resistant to concentrated acids and alkalis, as well as numerous organic solvents. It is highly resistant to corrosive chemicals except oxidizing acids; has extremely low moisture absorption and a very low coefficient of friction; is self-lubricating; and is highly resistant to abrasion, in some forms being 15 times more resistant to abrasion than carbon steel. Its coefficient of friction is significantly lower than that of nylon and acetal and is comparable to that of polytetrafluoroethylene (PTFE, Teflon), but UHMW-PE has better abrasion resistance than PTFE.